Hotpoint HDA3600RCC Installation Instructions - Page 9

Dishwasher Installation Note: The drain hose supplied with the dishwasher is approximately 78" long. If u longer hose is needed, a 10-foot-long hose may be purchased from an authorized GE appliance dealer. The 10-foot-long hose is part number GPFIOS. \\ _ / ,Strain Figure L Hose Stop Do not use this port if present STEP 9: INSERT DRAIN HOSE AND POWER CORD, IF USED, THROUGH CABINET • Upright the dishwasher and position it n front of the cabinet opening. , Insert the drain hose into the hole previously drilled in the cabinet wall. , If a power cord is used, guide the end of the cord through a separate hole cut for the power cord. The power cord should be routed directly to the rear of the junction box, avoiding contact with the door spring and other dishwasher components. Figure 0 VVater Figure M Drain Hose Collection Chamber Drain Port Tip: Avoid unnecessarg service charges for drain issues. Make sure the drain hose connection is leak-free and the hose is routed through the strain relief so it will not kink when the dishwasher is installed into the cabinet. STEP 8: POSITION WATER LINE AND POWER SUPPLY , Position the water supply line and house wiring on the floor of the opening to avoid interference with the base of the dishwasher and components under the dishwasher. Tip: Avoid unnecessarg service charges for no fill, drain or noise concerns. Position utility lines so they do not interfere with anything under or behind the dishwasher. STEP I0: INSTALL OPTIONAL GPF65 SIDE MOUNT BRACKETS Skip this step if the underside of countertop is wood or woodlike material. , Purchase and install the GPF65 side-mount bracket kit if the underside of counter is granite or a similar material that will not accept wood screws. The GPF65 kit is available from authorized GE appliance dealers. , Refer to Figure P and follow the instructions included in the kit. Side- Figure N Line Suppl U Tub Frame Bracket Attachment Side-Mount (2 Each _ OBrpatciokneat l Kit Figure P SScrideew)s 9