Hotpoint HDF310PGRWW Installation Instructions - Page 2
Installation Preparation
View all Hotpoint HDF310PGRWW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Installation Preparation PARTS SUPPLIED: • Junction box cover • #10 hex-head screw • Drain hose hanger • Hose clamp Junction Box Cover • 2 Plug buttons • Toekick (pre-installed on some models) • 2 Tub trim pieces (on some models) • Handle and 1/8" Allen wrench (on some models) • 2 Mounting brackets for wood countertops or side cabinets Plug Buttons • 2 #8-18 x 5/8" Phillips special head screws, to secure dishwasher to underside of countertop or to side cabinets • Insulation pieces (on some models) • Literature, samples and/or coupons Mounting Brackets #10 Hex-Head Junction Box Screw 3/8" long Toekick Drain Hose Hanger Hose Clamp Tub Trim Pieces (on some models) Handle and 1/8" Allen wrench (on some models) #8 Phillips Special Head Screws 5/8" long Insulation (on some models) Literature MATERIALS YOU WILL NEED: • ´*+7*DUGHQ+RVH7KUHDG ÛHOERZLQFOXGLQJ gasket) - with opposite end sized to fit Hot Water Line • Thread seal tape • UL-listed wire nuts (3) • Masking tape Thread Wire Nuts (3) GHT 90°Elbow Seal Tape (if applicable) Masking Tape Materials For New Installations Only: • Air gap for drain hose, if required • Waste tee for house plumbing, if applicable • Electrical cable or Power Cord Kit WX09X70910 (5' 5" long) or WX09X70911 (7' 11" long) depending on installation. • Strain relief for electrical connection • Hose clamps Air Gap Waste Tee Electrical Cable (or Power Cord, if applicable) Strain Relief • Hand shut-off valve (recommended) • Hot Water Line-3/8" minimum, copper tubing (including ferrule, compression nut) or GE Appliances Part # WX28X326, flexible braided hose. • WD24X10065 drain hose (12' long) or WD24X10062 Hose drain hose (4' long), if needed. Clamps Hand Shut-Off Valve Hot Water Line Optional 12' Drain Hose - WD24X10065 4' Drain Hose - WD24X10062 TOOLS YOU WILL NEED: • Phillips-head screwdriver • 1/4" and 5/16" nutdriver • 6" Adjustable wrench Phillips-Head Screwdriver • Level • Carpenter's square • Measuring tape • Safety glasses Measuring Tape • Flashlight • Bucket to catch water when flushing the line • 15/16" socket • Gloves • Pliers For New Installations Only: • Tubing cutter • Drill and appropriate bits • Hole saw set Tubing Cutter 1/4" and 5/16" Nutdriver Safety Glasses 15/16" Socket Drill and Bits 2 6" Adjustable Wrench Flashlight Level Bucket Carpenter's Square Gloves Pliers Hole Saw Set