Hunter 20578 Owner's Manual - Page 11

3 • Assembling and Hanging the Fan 3.1 CAUTION: The motor cover adapter has a special coating on the threads. 7 Do not remove this coating; the coating prevents the pipe/ball assembly from unscrewing. Once 3.2 3 assembled, do not remove the pipe/ ball assembly. 8 4 7 3 4 79 Insert the pipe/ball assembly (7) through the ceiling mounting plate cover (3) and ceiling mounting plate cover trim ring (4). Feed the wires from the fan through the pipe/ball assembly (7). Using the provided Allen wrench (79), loosen the setscrew (8) on the motor cover adapter to install the pipe and ball assembly (7). When the pipe and ball assembly (7)is fully installed, 2-3 threads on the pipe will still be visible; this is normal. 79 3.3 8 3.4 2 3 Use the Allen wrench (79) to securely retighten the setscrew (8). Raise the fan and align the slots in the ceiling mounting plate cover (3) with the hooks on the ceiling mounting plate (2). Note: To hang the fan, you must tilt the ceiling mounting plate cover (3) to an almost vertical position so that the ceiling mounting plate cover (3) slots sit on the ceiling mounting plate hooks. 7 42798-01 • 12/28/09 • Hunter Fan Company