Hunter 20578 Owner's Manual - Page 19
If you are using one of the enclosed pipe/ball assemblies, If you are using a pipe/ball assembly
![]() |
View all Hunter 20578 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
8 • Activating Auto BalanceTM 8.1 Red Retaining Screws Note: After the retaining screws are removed, the blades will feel loose. This is normal, as loose blades are a characteristic of the Auto BalanceTM system. 8.2 If you are using one of the enclosed pipe/ball assemblies, it is now time for you to activate the Auto BalanceTM system by removing the five red retaining screws. Rotate the blades slowly until one of the red retaining screws is visible through the notch in the mounting plate. Remove the retaining screw from the bottom of the fan housing using a screwdriver. Repeat this process for all 5 retaining screws. If you are using a pipe/ball assembly longer than 6 inches, leave the retaining screws in their place and continue the installation process. 15 42798-01 • 12/28/09 • Hunter Fan Company
![](/manual_guide/products/hunter-20578-owners-manual-e6b9597/19.png)