Hunter 20578 Owner's Manual - Page 17

6 • Installing the Ceiling Plate Cover 2 62 6.1 3 6.2 3 Swing the fan up to align the ceiling mounting plate cover screw holes with the mounting holes on the ceiling mounting plate(2). Partially install (about 2 full turns) the three ceiling mounting plate cover screws (62) into the ceiling mounting plate. Once all three screws are in, tighten them. 3 6.3 3 6.4 4 4 Using both hands, push the ceiling mounting plate cover trim ring (4) up to the top of the ceiling mounting plate cover. The ceiling mounting plate cover trim ring will snap and lock into place. Should you need to remove the trim ring, press firmly on opposite sides of the trim ring (4). The tabs will flex out releasing the ceiling mounting plate cover trim ring (4). 13 42798-01 • 12/28/09 • Hunter Fan Company