Hunter 20578 Owner's Manual - Page 13

Screw 3.9 3 • Assembling and Hanging the Fan (continued) Ground Wire 3.10 Optional Pipe/Ball Instructions: Remove the screw and ground wire from the pipe. Optional Pipe/Ball Instructions: Reassemble the ground wire, wedge, pin, ball, and pipe ball screw, in that order, onto the long pipe/ball assembly. Go back to Step 3.2. 44 •• SSeettttiinngg tthhee RReemmoottee TTrraannssmmiitttteerr aanndd RReecceeiivveerr 86 4.1 87 IMPORTANT! Before you change the DIP switch settings, make sure the battery is not connected to the transmitter. Also, make sure the power is still off. The DIP switches for the receiver (86) are located on the flat surface of the receiver. The jumpers for the transmitter (87) are in the battery compartment. 9 42798-01 • 12/28/09 • Hunter Fan Company