Husqvarna V554 Owner Manual - Page 11

To fill fuel, To set the product in stand on or walk behind position, To adjust the adjustable bar

Get Husqvarna V554 PDF manuals and user guides View all Husqvarna V554 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

• Make sure that there is sufficient fuel in the fuel tank. • Set the cutting height. Refer to To set the cutting height on page 12. To fill fuel WARNING: Gasoline is very flammable. Be careful and refuel outdoors, refer to Fuel safety on page 9. • Fold up the stand on platform to use the walk behind option. WARNING: The engine and the exhaust system become very hot during operation. Risk of burn injury. Let the engine and the exhaust system become cool before you fill fuel in the product. WARNING: Do not use the fuel tank as a support area. CAUTION: Incorrect type of fuel can result in engine damage. The engine runs on gasoline with a minimum octane rating of 91 RON (87 AKI), not mixed with oil. We recommend biodegradable alkylate gasoline. • Do a check of the fuel level before each use and refuel if it is necessary. • Do not fill the fuel tank fully. Fill to the bottom of the fuel tank neck. To set the product in stand on or walk behind position • Pull the latch to the right and fold down the stand on platform to use the stand on option. WARNING: Keep a safe distance when the stand on platform folds down. To adjust the adjustable bar 1. Turn the adjustment levers of the adjustable bar (A) counterclockwise, until the adjustable bar can rotate freely. A A B 2. Put the adjustable bar (B) into correct work position. 3. Turn the adjustment levers of the adjustable bar (A) clockwise unti they are fully tightened. To engage and disengage the parking brake • Pull the parking brake lever rearward to engage the parking brake. Refer to Product overview on page 3 for the location of the parking brake. Note: The product must be stationary when you engage the parking brake. • Push the parking brake forward to disengage the parking brake. To disengage and engage the drive system CAUTION: Only disengage the drive system when the product is parked on level ground. If it is necessary to move the product by hand, with the engine off, the drive system must be disengaged. 1995 - 002 - 05.12.2022 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
•
Make sure that there is sufficient fuel in the fuel
tank.
•
Set the cutting height. Refer to
To set the cutting
height on page 12
.
To fill fuel
WARNING:
Gasoline is very
flammable. Be careful and refuel
outdoors, refer to
Fuel safety on page 9
.
WARNING:
The engine and the
exhaust system become very hot during
operation. Risk of burn injury. Let the
engine and the exhaust system become
cool before you fill fuel in the product.
WARNING:
Do not use the fuel
tank as a support area.
CAUTION:
Incorrect type of fuel can
result in engine damage.
The engine runs on gasoline with a minimum octane
rating of 91 RON (87 AKI), not mixed with oil. We
recommend biodegradable alkylate gasoline.
•
Do a check of the fuel level before each use and
refuel if it is necessary.
•
Do not fill the fuel tank fully. Fill to the bottom of
the fuel tank neck.
To set the product in stand on or
walk behind position
•
Pull the latch to the right and fold down the stand
on platform to use the stand on option.
WARNING:
Keep a safe
distance when the stand on platform
folds down.
•
Fold up the stand on platform to use the walk
behind option.
To adjust the adjustable bar
1.
Turn the adjustment levers of the adjustable bar
(A) counterclockwise, until the adjustable bar can
rotate freely.
A
A
B
2.
Put the adjustable bar (B) into correct work
position.
3.
Turn the adjustment levers of the adjustable bar
(A) clockwise unti they are fully tightened.
To engage and disengage the
parking brake
•
Pull the parking brake lever rearward to engage
the parking brake. Refer to
Product overview on
page 3
for the location of the parking brake.
Note:
The product must be stationary when
you engage the parking brake.
•
Push the parking brake forward to disengage the
parking brake.
To disengage and engage the drive
system
CAUTION:
Only disengage the
drive system when the product is parked
on level ground.
If it is necessary to move the product by hand, with
the engine off, the drive system must be disengaged.
1995 - 002 - 05.12.2022
11