Husqvarna V554 Owner Manual - Page 14
To adjust the tracking speed, To get a good cutting result, To do a 3-point turn - mulching kit
View all Husqvarna V554 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
2. Push down the PTO button to disengage the drive of the blades. 3. Engage the parking brake. Refer to To disengage and engage the drive system on page 11. 4. Remove your hands from the 2 control levers to disengage the OPC. 5. Move the throttle control to the minimum throttle position. 6. Turn the ignition key to the stop position. • Do not cut a wet lawn. Wet grass can give a bad cutting result. • Start with a high cutting height and decrease it gradually. • Use full throttle when you cut the grass. • Move the product forward at low speed if the grass is high and thick. • Cut the grass in an irregular pattern. • When the mulch kit is used, cut the grass more frequently. • To get the best cutting result, cut the grass frequently. To do a 3-point turn A correct turn will prevent damage to the lawn. The goal is to turn when you move forward or rearward. Do not turn in a tight circle on a stopped wheel. 1. Cut a row of grass. 2. Make a small turn (A) in the direction of the uncut area of grass. B 7. Remove the ignition key from the ignition when you are away from the product. To adjust the tracking speed 1. Pull out the retaining clip from the vertical control rod. C A 2. Adjust the coupler until the speed is correct. When the unit tracks straight and is at correct maximum forward speed, put the retaining clip into the vertical control rod to lock the coupler. To get a good cutting result • For best performance, do maintenance on the product regularly as given in the maintenance schedule. Refer to Maintenance schedule on page 15. 3. Pull the 2 control levers to the reverse position and move the product rearward (B). 4. Push the control levers forward. To make a small turn (C), pull harder on the control lever that is in the direction of the row you have cut before. 5. Push the 2 control levers forward to cut the next row. 14 1995 - 002 - 05.12.2022