Husqvarna V554 Owner Manual - Page 13
To operate the product, To stop the engine, engage and disengage the parking brake
![]() |
View all Husqvarna V554 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
9. Push the throttle control to the full throttle position. To operate the product 1. Start the engine. Refer to To start the engine on page 12. 2. Push down the 2 control levers to engage the OPC. a) Pull the left control lever rearward in the direction of the neutral position to make the product turn left. The more you pull the left control lever rearward, the more the product will turn left. 3. Disengage the parking brake. Refer to To engage and disengage the parking brake on page 11. 4. Carefully push the 2 control levers forward. The product will start to move forward. The forward speed increases the more the 2 control levers are pushed forward. b) Pull the right control lever rearward in the direction of the neutral position to make the product turn right. The more you pull the right control lever rearward, the more the product will turn right. 5. Carefully pull the 2 control levers rearward. The product will start to move rearward. The rearward speed increases the more the 2 control levers are pulled rearward. 6. Put the 2 control levers in neutral position to decrease the speed and stop the product. 7. Do the steps that follow to turn left or right when you go in a forward direction. 8. Do the steps that follow to make a zero turn. a) Pull the 2 control levers rearward in the direction of the neutral position to decrease the speed or stop the product. b) Move 1 control lever slightly forward and the other control lever slightly rearward to make a zero turn. 9. Lower the cutting deck to mow position. Refer to To set the cutting deck in transport position or mow position on page 12. 10. Pull up the PTO button to engage the drive of the blades. 11. If it is necessary to adjust the cutting height during operation, refer to To set the cutting height on page 12. To stop the engine 1. Move the 2 control levers to the neutral position to stop the product. 1995 - 002 - 05.12.2022 13
![](/manual_guide/products/husqvarna-v554-owner-manual-e6a5738/13.png)