Husqvarna Z246 Owners Manual - Page 13
Steering Control Levers, Park Brake, Ignition Switch, WARNING, IMPORTANT INFORMATION - zero turn
View all Husqvarna Z246 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Steering Control Levers CONTROLS WARNING! The machine can turn very rapidly if one steering control is moved much further forward than the other. Park Brake The machine's speed and direction are continuously variable using the two steering controls. The steering controls can be moved forward or backward about a neutral position. Furthermore, there is a neutral position, which is locked if the steering controls are moved outward. When both controls are in the neutral position (N), the machine stands still. By moving both controls an equal amount forward or backward, the machine moves in a straight line forward or backward respectively. In order, for example, to turn right while moving forward, move the right control towards the neutral position. The rotation of the right wheel is reduced and the machine turns to the right. Zero turn can be achieved by moving one control backward (behind the neutral position) and carefully moving the other steering control forward from its neutral position. The rotation direction when zero turning is determined by which steering control is moved backward behind the neutral position. If the left steering control is pulled backward, the machine turns to the left. Use extra care when using this maneuver. If the steering controls are in uneven positions when standing still or do not fit in the slots for moving the controls outward, they can be adjusted. The park brake is integrated with the steering control levers. Move the levers outward from the neutral position to engage the park brake. To release the park brake, rotate both steering control levers inwards to the neutral position. Do not attempt to operate the unit without both levers being inwards out of the engaged position or machine components could be damaged. IMPORTANT INFORMATION The machine must stand absolutely still when applying the park brake. Always set the park brake before dismounting. Release the park brake before moving the mower. Ignition Switch The ignition switch is placed on the control panel and is used to start and stop the engine. 13