Home » IBM Manuals » Printers » IBM 4530-N01 » Manual Viewer

IBM 4530-N01 User Guide - Page 11

Specify following items as you required., Press the [ENTER] button to save option settings.

Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

6 Specify following items as you required. 1 • TX TYPE - This sets the type of the fax transmission mode. Press the [MEMORY TX] button to select the memory transmission mode or the [DIRECT TX] button to select the direct transmission mode. • ECM - Select whether enabling or disabling the ECM (Error Correction Mode) to automatically resend any portion of the document affected by phone line noise or distortion. Press the [ON] button to enable the ECM, or the [OFF] button to disable the ECM. • QUALITY TX - Select whether a document is sent in the Quality TX mode. This feature allows to send a document at a slower speed than a normal so that the transmission will be less affected by line condition. Press the [ON] button to enable the Quality TX, or [OFF] button to disable the Quality TX. • LINE SELECT - Select the line to be used for the fax transmission. Press the [LINE1] button to use the Line 1, or [LINE2] button to use Line 2. The [LINE2] button can be selected only when the optional 2nd line board is installed. • [SUB] - Enter the mailbox number if you want to send originals to the mailbox in the remote fax. • [SID] - Enter the password to input a document into the mailbox in the remote facsimile. • [SEP] - Enter the mailbox number if you want to retrieve a document from the mailbox in the remote fax. • [PWD] - Enter the password to retrieve a document from the mailbox in the remote facsimile. When you press the [SUB], [SID], [SEP], and [PWD] buttons, the input screen is displayed. Enter the value using the keyboard and digital keys, and press the [ENTER] button to set the entry. 7 Press the [ENTER] button to save option settings. 8 Press the [ENTER] button to register the contact. 9

Section	Page
TABLE OF CONTENTS	3
PREFACE	5
FEATURES OF THE Océ im3530 /im4530	6
1. MANAGING ADDRESS BOOK (ADDRESS MENU)	7
1. MANAGING ADDRESS BOOK	8
About Managing Contacts in Address Book	8
Registering Contacts	9
Editing Contacts	12
Deleting Contacts	14
Searching Contacts	16
2. MANAGING GROUPS	20
About Managing Groups in Address Book	20
Creating New Group	21
Editing Groups	24
Deleting Groups	30
Searching Groups	32
Confirming the Members of the Groups	36
2. MANAGING COUNTERS (COUNTER MENU)	37
1. TOTAL COUNTER	38
Displaying Print Counter	38
Displaying Scan Counter	39
2. PRINT OUT TOTAL COUNTER	40
3. DEPARTMENT COUNTER	41
Displaying Print Counter for Department Code	41
Displaying Scan Counter for Department Code	43
Displaying Fax Communication Counter for Department Code	45
4. MANAGING DEPARTMENT CODE	47
Logging On As Administrator	47
Printing Department Codes List	49
Enabling Department Code	50
Resetting All Department Counters	51
Deleting All Department Codes	52
Registering a New Department Code	53
Editing the Department Code	56
Deleting the Department Code	60
Resetting the Counter of Each Department	62
Setting Output Limitations for All Departments	64
3. SETTING ITEMS (USER)	65
1. SETTING GENERAL FUNCTIONS	66
Setting the Auto Clear Mode	66
Changing the Display Language	67
Setting the Reversed Display Mode	68
2. SETTING COPY FUNCTIONS	70
3. SETTING FAX FUNCTIONS	71
4. SETTING SCAN FUNCTIONS	73
5. PRINTING LISTS	75
Printing the Address Book List	75
Printing the Group Numbers List	76
Printing the Function List (User)	77
6. CHECKING E-MAIL	78
7. SETTING DRAWER	79
8. TURN OFF THE POWER (SHUT DOWN)	80
4. SETTING ITEMS (ADMIN)	83
1. ENTERING TO ADMIN MENU	84
2. SETTING GENERAL FUNCTIONS	86
Setting the Device Information	86
Setting the Notification	88
Changing the Administrator Password	90
Setting the Date and Time	92
Setting the Weekly Timer	94
Setting the Auto Power Save Mode	97
Setting the Sleep/Auto Shut Off Mode	99
Setting the Drawer Setup Pop-Up	101
3. SETTING NETWORK FUNCTIONS	102
Setting the TCP/IP Protocol	102
Setting the IPX/SPX Protocol	107
Setting the NetWare Settings	109
Setting the SMB Protocol	111
Setting the AppleTalk Protocol	114
Setting the HTTP Network Service	116
Setting the Ethernet Speed	118
Setting the LDAP and SNMP Network Service	120
4. SETTING COPY FUNCTIONS	122
5. SETTING FAX FUNCTIONS	124
Setting the Terminal ID	124
Setting the Fax Initial Setup	127
Setting the Line-2 Mode	129
Setting the RX Printing	132
Setting the Recovery Transmission	136
6. SETTING FILE FUNCTIONS	138
7. SETTING E-MAIL FUNCTIONS	139
Setting the Scan to E-mail Message Properties	139
Setting the Scan to E-mail Fragmentation	140
8. SETTING INTERNET FAX FUNCTIONS	141
Setting the Internet Fax Message Properties	141
Setting the Internet Fax Fragmentation	142
Setting the Internet Fax Body String Transmission	143
9. SETTING LIST/REPORT	144
Setting the Transmission / Reception Journal	144
Setting the Communication Report	146
Setting the Reception List	149
10. PRINTING LISTS	151
11. SETTING PRINTER/E-FILING FUNCTIONS	152
12. WIRELESS SETTINGS AND Bluetooth SETTINGS	153
5. APPENDIX	155
1. LIST PRINT FORMAT	156
Total Counter List	156
Department Code List	157
Address Book List	158
Group Numbers List	159
Function List (User)	160
NIC Configuration Page	161
Function List (Administrator)	162
PS3 Font List	177
PCL Font List	178

Match case Limit results 1 per page

Specify following items as you required.

•

TX TYPE

— This sets the type of the fax transmission mode.

Press the [MEMORY TX] button to select the

memory transmission mode or the [DIRECT TX] button to select the direct transmission mode.

•

ECM

— Select whether enabling or disabling the ECM (Error Correction Mode) to automatically resend any

portion of the document affected by phone line noise or distortion.

Press the [ON] button to enable the ECM,

or the [OFF] button to disable the ECM.

•

QUALITY TX

— Select whether a document is sent in the Quality TX mode. This feature allows to send a doc-

ument at a slower speed than a normal so that the transmission will be less affected by line condition.

Press

the [ON] button to enable the Quality TX, or [OFF] button to disable the Quality TX.

•

LINE SELECT

— Select the line to be used for the fax transmission.

Press the [LINE1] button to use the Line

1, or [LINE2] button to use Line 2.

The [LINE2] button can be selected only when the optional 2nd line board is

installed.

•

[SUB]

— Enter the mailbox number if you want to send originals to the mailbox in the remote fax.

•

[SID]

— Enter the password to input a document into the mailbox in the remote facsimile.

•

[SEP]

— Enter the mailbox number if you want to retrieve a document from the mailbox in the remote fax.

•

[PWD]

— Enter the password to retrieve a document from the mailbox in the remote facsimile.

When you press the [SUB], [SID], [SEP], and [PWD] buttons, the input screen is displayed.

Enter the value using

the keyboard and digital keys, and press the [ENTER] button to set the entry.

Press the [ENTER] button to save option settings.

Press the [ENTER] button to register the contact.