IBM 494419X User Guide - Page 7
Connecting your Monitor for Analog, computer or video adapter card is normally blue to match the blue
UPC - 000435852625
View all IBM 494419X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Connecting your Monitor for Analog Be sure to read the 'Safety' Information located in the Monitor Safety and Warranty Guide before carrying out this procedure. 1. Turn off your computer and all attached devices. 2. Tilt the monitor all the way forward. 3. Connect the analog signal cable to the VGA video port on the back of your computer. This port might be directly attached to your computer (figure A), or it might be part of a video adapter card (figure B). The analog video port on your computer or video adapter card is normally blue to match the blue connector on your monitor's analog video cable. 4. Attach the power cord at the back of the monitor where it says "AC IN". The arrow in the drawing below indicates the approximate area: 5. Insert the power plug into a properly grounded electrical outlet. 6