IBM 86594RY Hardware Maintenance Manual - Page 129
Place your index fingers on the small, remove it by following these instructions
![]() |
UPC - 087944479673
View all IBM 86594RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
4. If you are replacing a microprocessor, remove the existing microprocessor from its socket. Otherwise, go to step 5 on page 122. a. Locate the microprocessor socket on the system board. (See the illustration in "System board illustration" on page 142.) b. Grasp the middle of the microprocessor adapter 1 and pull straight up, lifting the microprocessor out of the connector 2 . Note If the microprocessor has tabs at the upper corners instead of an adapter with a handle, remove it by following these instructions: 1. Place your index fingers on the small retainer tabs on the top of the microprocessor. 2. Push in toward the microprocessor until the tabs release. Tabs 3. Lift the microprocessor out of the connector. Note The illustrations in this section might differ slightly from the hardware. Netfinity 5000 - Type 8659 121
![](/manual_guide/products/ibm-86595ry-hardware-maintenance-manual-a5411ab/129.png)