IBM 86594RY Hardware Maintenance Manual - Page 39
Plug and Play, Error log, Configuring PCI features and options, Legacy, Clear Error
UPC - 087944479673
View all IBM 86594RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Plug and Play: Most adapters designed for PCI slots are Plug and Play devices that are auto-configuring. However, many ISA adapters are not Plug and Play devices and you must allocate the system resources that the adapter will use. Select Plug and Play to identify the available system resources: Memory I/O ports DMA Interrupt Note The menus do not contain resources that are used by the system or by previously installed Plug and Play adapters. Select Plug and Play; then, use the Up Arrow (↑) and Down Arrow (↓) key to highlight the system resource that you want to change. Use the Left Arrow (←) or Right Arrow (→) key to toggle from Plug and Play to ISA Legacy for the selected menu choice. Error log: Select Error Log to view the three most recent power-on self-test (POST) errors the system has generated, or to view the system error log. You can clear both error logs from this screen by selecting Clear Error Logs. Configuring PCI features and options: PCI devices automatically communicate with the server configuration information. This usually results in automatic configuration of a PCI device. If a conflict does occur, see "Resolving resource conflicts" on page 50. Multiple-function PCI adapters use more than one interrupt. When you install one of these adapters, review the IRQ assignments in the Configuration/Setup utility programs (see "PCI bus control" on page 30). Verify that the IRQ assignments are correct. The Netfinity 5000 server uses a rotational interrupt technique to configure PCI adapters. This technique enables you to install a variety of PCI adapters that currently do not support sharing of PCI interrupts. For information on manually overriding the interrupt setting, see "PCI bus control" on page 30. Netfinity 5000 - Type 8659 31