IBM 86594RY Hardware Maintenance Manual - Page 30
Configuration/Setup utility usage, System summary
UPC - 087944479673
View all IBM 86594RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Configuration/Setup utility usage From the Configuration/Setup Utility program main menu you can select settings you want to change. Pressing F1 displays Help information for a selected menu item. Notes 1. If you enter only the power-on password and an administrator (supervisor-level) password is also set, a limited version of the menu appears. To view the full Configuration/Setup Utility menu you must enter the administrator password. 2. The choices on some menus might differ slightly, depending on the BIOS version that comes with the server. To change configuration settings: 1. Use the Up Arrow (↑) key to select the item you want to change; then, press Enter. 2. Select the configuration setting you want to change. Use the Right Arrow (→) or Left Arrow (←) key to highlight the menu, if needed. 3. Use the Right Arrow (→) or Left Arrow (←) key to select the appropriate setting for the selected item. 4. Repeat Steps 1 through 3 for each setting that you want to change. Press Esc to return to the Configuration/Setup Utility main menu. 5. After making changes, you can select: Save Settings to save the selected changes. Restore Settings to delete the selected changes. Load Default Settings to cancel the changes and restore the factory settings. 6. To exit from the Configuration/Setup Utility main menu, select Exit Setup. 7. The system prompts you to confirm your choice. You can return to the Configuration/Setup Utility main menu, or exit. System summary: Select this choice to display configuration information, such as the type and speed of the microprocessor, and amount of memory. Changes that you make to configuration settings appear on this summary screen. You cannot edit the fields. 22 Netfinity Server HMM