IBM 86594RY Hardware Maintenance Manual - Page 36
Defining a system owner's name, The System Owners Name screen appears.
UPC - 087944479673
View all IBM 86594RY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
3. Move the cursor to the Enter Administrator Password Again data field and type the password again. Note A message appears if the two passwords do not match. If this happens, press Enter to return to the Administrator Password menu. 4. Select Change Administrator Password to save the new password; then, press Enter. The password becomes effective immediately. To delete an administrator password: 1. Select Administrator Password from the System Security menu; then, press Enter. 2. Select Delete Administrator Password; then, press Enter. 3. A confirmation window appears. Press Enter to delete the administrator password. Press Esc to return to the System Security menu. To enable a user to change the power-on password: 1. Select Administrator Password from the System Security menu; then, press Enter. 2. Select Power-on password changeable by user. Press the Left Arrow (←) or Right Arrow (→) key to toggle the entry to Yes. When this choice is enabled, System Security appears on the limited Configuration/Setup menu. The System Security menu contains the Power-on Password choice. Defining a system owner's name: You can specify a system owner's name that displays during POST each time that the server is started. If you set an administrator password, only the administrator can set, change, or delete the system owner's name. To set the system owner's name: 1. Select System Owners Name from the System Security menu; then, press Enter. The System Owners Name screen appears. 2. Type the name in the Enter System Owners Name String data field. You can use any combination of up to 15 characters and spaces in the system owner's name. 3. Press the Down Arrow (↓) key to select the Set or Change System Owners Name data field. 4. Press Enter to set the name or change a previously defined name. To delete the system owner's name, select Delete Stored System Owners Name; then, press Enter. 28 Netfinity Server HMM