IBM 8840 Installation Guide - Page 28
Installing, memory, module - serverproven
UPC - 000435863799
View all IBM 8840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
SCSI adapter SCSI cable 9. Perform any configuration tasks that are required for the adapter. 10. If you have other options to install or remove, do so now. 11. Replace the top cover. Go to "Completing the installation" on page 22. Installing a memory module The following notes describe the types of dual inline memory modules (DIMMs) that the server supports and other information that you must consider when installing DIMMs: v The server supports 256 MB, 512 MB, 1 GB, and 2 GB DIMMs, for a maximum of 16 GB of system memory. The server supports up to eight 1.8 V, 240-pin, PC2-3200, ECC DDR II SDRAM, 200 MHz DIMMs. Go to the ServerProven list at http://www.ibm.com/servers/eserver/serverproven/compat/us/ for a list of memory modules that you can use with the server. v The server comes with a minimum of two 256 MB DIMMs, installed in slots 1 and 2. When installing additional DIMMs, you must install two DIMMS at a time, in the order shown in the following table, to maintain performance. Table 2. DIMM installation sequence Pair DIMM connectors 1 1 and 2 2 3 and 4 14 IBM xSeries 346 Type 8840: Installation Guide