IBM 8863 User Manual - Page 57
Using, SAS/SATA, Configuration, Utility, program, ServeRAID, configuration, programs, agent, utility
UPC - 000435474667
View all IBM 8863 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Using the SAS/SATA Configuration Utility program To start the SAS/SATA Configuration Utility program, complete the following steps: 1. Turn on the server. 2. When the prompt > appears, press Ctrl+A. 3. To select a choice from the menu, use the arrow keys. 4. Follow the instructions on the screen to change the settings of the selected items, and press Enter. Using the ServeRAID configuration programs A ServeRAID controller enables you to configure multiple physical hard disk drives to operate as logical drives in a disk array. The controller comes with a CD containing the ServeRAID Manager program and the ServeRAID Mini-Configuration program, which you can use to configure the ServeRAID controller. For information about these programs, see the documentation that comes with the ServeRAID controller and the User's Guide on the IBM xSeries Documentation CD. If your server comes with an operating system installed, such as Microsoft Windows 2000 Datacenter Server, see the software documentation that comes with the server for configuration information. Using the PXE boot agent utility program The Preboot Execution Environment (PXE) boot agent utility program is part of the BIOS code. You can use it to specify the startup order of devices and enable or disable operating-system wake-up support. Note: The server does not support changing the network boot protocol or specifying the startup order of devices through the PXE boot agent utility program. Complete the following steps to start the PXE boot agent utility program: 1. Turn on the server. 2. When the Initializing Intel (R) Boot Agent Version X.X.XX PXE 2.0 Build XXX (WfM 2.0) prompt appears, press Ctrl+S. You have 2 seconds (by default) to press Ctrl+S after the prompt appears. If the prompt does not appear, use the Configuration/Setup Utility program to enable the Ethernet PXE/DHCP option. 3. Use the arrow keys and press Enter to select a choice from the menu. 4. Follow the instructions on the screen to change the settings of the selected items; then, press Enter. Chapter 4. Configuring the server 45