IBM 9512AB1 User Guide - Page 5

ENGLISH Monitor Installation Connecting your Monitor 1. Turn off your computer and all attached devices. Next, unplug the power cord(s) to your computer and all attached devices. 2. Connect the signal cable. The analog signal cable is already connected to your monitor. The analog connector is the blue connector. When connecting the analog signal cable (Figure A) Connect the free end of the attached signal cable to the 15-pin Monitor port on the computer and tighten screws. (Figure A) If connecting a DVI-D digital signal cable (Figure B) Connect one end of the monitor signal cable to the white connector on the rear panel of the monitor. Connect the other end to the white connector on the rear panel of the computer and tighten the screws. (Figure B) Cable not supplied (Optional) 3