IBM DARA-206000 Hard Drive Specifications - Page 15
General Features - 6gb
![]() |
View all IBM DARA-206000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
2.0 General Features 2.5-inch, 9.5mm/12.7mm/17.0mm height MCC Compliance 6GB - 25GB formatted capacity 512 bytes/sector AT Interface (Enhanced IDE) conforming to ATA-4 No-ID recording format PRML channel On The Fly correction : 12 Bytes/sector 418 KB Segmented Buffer for Read and Write Host data transfer speed. − 66.6 MB/sec : Ultra DMA Mode-4 (Ultra ATA/66) Media data transfer rate − 161.6 Mbit/sec max (DARA-218000/215000/212000/209000/206000) − 181.2 Mbit/sec max (DARA-225000) Average seek time 12 ms for read Closed-loop actuator servo (Embedded Sector Servo) Rotary voice coil motor actuator Load / Unload mechanism Adaptive power save control − 0.65 W at low-power-idle (DARA-218000/215000/212000/209000/206000) − 0.85 W at low-power-idle (DARA-225000) Power on to ready − 2.8 sec (DARA-212000/209000/206000) − 3.0 sec (DARA-218000/215000) − 4.5 sec (DARA-225000) Non-operating Shock − 800 G/1ms (DARA-212000/209000/206000) − 700 G/1ms (DARA-218000/215000) − 500 G/2ms (DARA-225000) Operating Shock − 175 G/2ms (DARA-218000/215000/212000/209000/206000) − 150 G/2ms (DARA-225000) Address Offset Feature to support D F T implementation Note: Mounting screw position is − Incompatible with DBOA/DMCA/DCRA/DSOA/DPRA-2xxxx. − Compatible with DTNA/DLGA/DDLA/DTCA/DPLA/DYKA/DYLA/DADA/ DKLA/DBCA/DCXA/DCYA-2xxxxx. Copyright IBM Corp. 1999 5
![](/manual_guide/products/ibm-dara206000-hard-drive-specifications-2939f73/15.png)