IBM DARA-206000 Hard Drive Specifications - Page 26
WRITE Safety, Data buffer test, Error Recovery, Automatic Reallocation
![]() |
View all IBM DARA-206000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
4.4 WRITE Safety The drive ensures that the data is written into the disk media properly. Following conditions are monitored during a write operation. When one of those conditions exceeds the criteria, the write operation is terminated and automatic retry sequence will be invoked. Head off track External shock Low supply voltage Spindle speed tolerance 4.5 Data buffer test The data buffer is tested at Power-on-reset and when a drive self-test is requested by the host. The tests are consisted of write/read '00'x and 'ff'x pattern on all buffer. 4.6 Error Recovery Errors occurring on the drive are handled by the error recovery procedure. Errors that are uncorrectable after application of the error recovery procedures are reported to the host system as non-recoverable errors. 4.7 Automatic Reallocation The sectors that show some errors may be reallocated automatically when specific conditions are met. The drive does not report for auto-reallocation to the host system. The conditions for auto-reallocation are described below. 4.7.1 Non Recovered Write Errors When a write operation can not be completed after the Error Recovery Procedure (ERP) is fully carried out, the sector(s) are reallocated to the spare location. An error is reported to the host system only when the write cache is disabled and the auto reallocation is failed. 4.7.2 Non Recovered Read Errors When a read operation is failed after defined E R P is fully carried out, a hard error is reported to the host system. This location is registered internally as a candidate for the reallocation. When a registered location is specified as a target of a write operation, a sequence of media verification is performed automatically. When the result of this verification meets the criteria, this sector is reallocated. 4.7.3 Recovered Read Errors When a read operation for a sector failed once then recovered at the specific E R P step, this sector is reallocated automatically. A media verification sequence may be run prior to the reallocation according to the pre-defined conditions. 16 OEM Specifications of DARA-2xxxxx 2.5 inch H D D Rev 2.1
![](/manual_guide/products/ibm-dara206000-hard-drive-specifications-2939f73/26.png)