IBM DARA-206000 Hard Drive Specifications - Page 175
Total Time in Seconds to Complete Off-line Data Collection Activity
View all IBM DARA-206000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
2 All segments completed without errors. In this case, current segment pointer equals to total seg- ments required. 4 Off-line data collection suspended by interrupting command 5 Off-line data collecting aborted by interrupting command 6 Off-line data collection aborted with fatal error 12.31.2.4 Self-test execution status Bit Definition 0-3 Percent Self-test remaining An approximation of the percent of the self-test routine remaining until completion in ten percent increments. Valid values are 0 through 9. 4-7 Current Self-test execution status 0 The self-test routine completed without error or has never been run 1 The self-test routine aborted by the host 2 The self-test routine interrupted by the host with a hard or soft reset 3 The device was unable to complete the self-test routine due to a fatal error or unknown test error 4 The self-test routine completed with unknown element failure 5 The self-test routine completed with electrical element failure 6 The self-test routine completed with servo element failure 7 The self-test routine completed with read element failure 15 The self-test routine in progress 12.31.2.5 Total Time in Seconds to Complete Off-line Data Collection Activity This field tells the host how many seconds the device requires to complete the off-line data collection activity. 12.31.2.6 Current Segment Pointer This byte is a counter indicating the next segment to execute as an off-line data collection activity. Because the number of segments is 1, 01h is always returned in this field. 12.31.2.7 Off-Line Data Collection Capability Bit Definition 0 Execute Off-line Immediate implemented bit 0 SMART Execute Off-line Immediate subcommand is not implemented 1 SMART Execute Off-line Immediate subcommand is implemented 1 Enable/disable Automatic Off-line implemented bit 0 SMART Enable/disable Automatic Off-line subcommand is not implemented 1 SMART Enable/disable Automatic Off-line subcommand is implemented 2 abort/restart off-line by host bit 0 The device will suspend off-line data collection activity after an interrupting command and resume it after some vendor specific event 1 The device will abort off-line data collection activity upon receipt of a new command Command Descriptions 165