IBM DARA-206000 Hard Drive Specifications - Page 30
The idle current is specified at an inner track.
View all IBM DARA-206000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
(*2) The disk drive shall not incur damage for an over voltage condition of + 2 5 % (maximum duration of 20 ms) on the 5-volt nominal supply. (*3) The idle current is specified at an inner track. (*4) The read/write current is specified based on three operations of 63 sector read/write per 100 msec. (*5) The seek average current is specified based on three operations per 100 msec. (*6) The typical current wave form at start up is shown in 5.2.1, " Start Up Current" on page 21. 20 OEM Specifications of DARA-2xxxxx 2.5 inch H D D Rev 2.1
(*2)
The disk drive shall not incur damage for an over voltage condition of +25% (maximum duration of
20 ms) on the 5-volt nominal supply.
(*3)
The idle current is specified at an inner track.
(*4)
The read/write current is specified based on three operations of 63 sector read/write per 100 msec.
(*5)
The seek average current is specified based on three operations per 100 msec.
(*6)
The typical current wave form at start up is shown in 5.2.1, “ Start Up Current” on page 21.
20
OEM Specifications of DARA-2xxxxx 2.5 inch HDD Rev 2.1