Icom IC-7300 Instruction Manual basic - Page 12

1 PANEL DESCRIPTION Touch panel display This section describes the icons, screens, dialogs, readouts and so on that are displayed on the IC-7300 screen. Refer to the pages posted beside each item for details. q w e r t y u i o !0 !1 !2 !3 !4 !5 q TUNE ICON (p. 7-1) Appears while tuning the antenna. w MODE INDICATOR (p. 3-2) Displays the selected operating mode. e PASSBAND WIDTH INDICATOR (p. 4-3) Graphically displays the passband width for twin PBT operation and the center frequency for IF shift operation. r TONE INDICATOR (p. 4-17) Displays the selected tone type in the tone operation mode. t IF FILTER INDICATOR (p. 4-4) Displays the selected IF filter. y QUICK TUNING ICON Appears when the Quick Tuning Step function is ON. u IP PLUS ICON (p. 4-5) Appears when the IP Plus function is ON. i MEMORY NAME READOUT (p. 1-8) Displays the memory name if entered. o M1~M8/T1~T8/OVF ICON Displays "M1"~"M8" while "External Keypad" on the CONNECTORS screen is set to ON and using the Memory Keyer function (p. 4-14). Displays "T1"~"T8" while using the Voice TX memory. Displays "OVF" when an excessively strong signal is received. !0 VOICE RECORDER ICON Appears while recording. !1 SD CARD ICON (p. 6-1) Appears when an SD card is inserted, or blinks while accessing the SD card. !2 CLOCK READOUT Displays the current local time. Touch the readout to display both the current local time and UTC time. !3 SPLIT ICON (p. 4-10) Appears when the Split function is ON. !4 VFO/MEMORY ICON (p. 3-1) "VFO A" or "VFO B" appears when the VFO mode is selected, and "MEMO" appears when the Memory mode is selected. !5 MEMORY CHANNEL READOUT Displays the selected memory channel number. 1-4