Icom IC-7300 Instruction Manual basic - Page 59
USB SE²D, USB Keying CW, USB Keying RTTY, BW Popup PBT, BW Popup FIL, Power O² Check
View all Icom IC-7300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
SET MODE 8 Connectors (Continued) RTTY Decode Baud Rate (Default: 9600) Selects the data transfer rate (Baud rate) of decoded RTTY signals. USB SEND (Default: OFF) You can control transmit and receive from the PC through the USB port. Selects the control port to be used for communication between the IC-7300 and PC, according to the operating condition. LYou cannot select the terminal which is already selected in the "USB Keying (CW)" or "USB Keying (RTTY)" item. USB Keying (CW) (Default: OFF) You can control transmit, receive and keying from the PC, through the USB port. Selects the control port to be used for communication between the IC-7300 and PC, according to the operating condition. LYou cannot select the terminal which is already selected in the "USB SEND" or "USB Keying (RTTY)" item. USB Keying (RTTY) (Default: OFF) You can control transmit, receive and RTTY (FSK) from the PC, through the USB port. Selects the control port to be used for communication between the IC-7300 and PC according to the operating condition. LYou cannot select the terminal which is already selected in the "USB SEND" or "USB Keying (CW)" item. Display LCD Backlight Sets the LCD backlight brightness. Display Type Sets the display type to A or B. 1 (Default: 50%) 2 (Default: A) 3 Display Font 4 (Default: Basic) Selects the font for the frequency readout. 5 Meter Peak Hold (Default: ON) Turns the Meter peak hold function ON or OFF. 6 Memory Name 7 (Default: ON) Turns the Memory name display in the Memory mode ON or OFF. 8 MN-Q Popup (MN OFF→ON) 9 (Default: ON) Selects whether or not to display the Manual Notch filter width when you select the Manual Notch. 10 BW Popup (PBT) 11 (Default: ON) Selects whether or not to display the PBT shift value 12 while rotating TWIN PBT CLR . 13 BW Popup (FIL) (Default: ON) 14 Selects whether or not to display the IF filter width and shift value when you switch the IF filter by touching the filter icon. 15 Screen Saver 16 (Default: 60min) Sets the Screen Saver function. This function activates when no operation is 17 performed for a preset period of time. 18 Opening Message (Default: ON) Selects whether or not to display the opening 19 message at power ON. 20 My Call Displays text as the opening message, up to 10 21 characters. Power ON Check (Default: ON) Selects whether or not to display the RF Power level at power ON. Display Language Sets the display language. (Default: English) 8-6