Icom IC-7300 Instruction Manual basic - Page 2

Thank you for choosing this Icom product. The IC-7300 HF/50 MHz TRANSCEIVER is designed and built with Icom's state of the art technology and craftsmanship. With proper care, this product should provide you with years of trouble-free operation. We appreciate you making the IC-7300 your transceiver of choice, and hope you agree with Icom's philosophy of "technology first." Many hours of research and development went into the design of your IC-7300. IMPORTANT READ ALL INSTRUCTIONS carefully completely before using the transceiver. SAVE THIS INSTRUCTION MANUAL- This instruction manual contains full operating instructions for the IC-7300. FEATURES ••RF Direct Sampling System The IC-7300 employs an RF direct sampling system. RF signals are directly converted to digital data and processed in the FPGA. This system is a leading technology marking an epoch in amateur radio. ••Real-Time Spectrum Scope The spectrum scope is class-leading in resolution, sweep speed and dynamic range. When you touch the scope screen on the intended signal, the touched area is magnified. The large 4.3 inch color TFT touch LCD offers intuitive operation. ••New "IP+" Function The new IP Plus function improves 3rd order intercept point (IP3) performance. When a weak signal is received adjacent to strong interference, the AD converter is optimized against signal distortion. ••Class Leading RMDR and Phase Noise Characteristics The RMDR is improved to about 97dB (typical value) and Phase Noise characteristics are also improved about 15dB (at 1 kHz frequency separation) compared to the IC-7200. ••A 4.3 inch touch panel color display ••A built-in automatic antenna tuner ••Multi-function control for easy settings EXPLICIT DEFINITIONS WORD R DANGER! R WARNING! CAUTION NOTE DEFINITION Personal death, serious injury or an explosion may occur. Personal injury, fire hazard or electric shock may occur. Equipment damage may occur. Recommended for optimum use. No risk of personal injury, fire or electric shock. SUPPLIED ACCESSORIES Hand microphone (HM-219) ACC plug (13 pin) Spare fuse (5 A) Spare fuse (25 A) DC power cable* (3 m: 9.8 ft) CW key plug (6.35 mm: 1/4" Stereo) Spare fuse (30 A) Speaker plug (3.5 mm: 1/8" Stereo) *For European versions CD LDifferent types of accessories may be supplied, or may not be supplied depending on the transceiver version. This product includes RTOS "RTX" software, and is licensed according to the software license. This product includes "zlib" open source software, and is licensed according to the open source software license. This product includes "libpng" open source software, and is licensed according to the open source software license. Refer to the Text files in the License folder of included CD for information on the open source software being used by this product. i