Icom IC-7300 Instruction Manual basic - Page 24
Band Edge Beep
View all Icom IC-7300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
3 BASIC OPERATION Setting the frequency (Continued) Entering the Split Frequency Offset 1. Touch the MHz digits. (Example: 14) ••Opens the BAND STACKING REGISTER screen. 2. Touch [F-INP]. Entering a Memory channel 1. Touch V/M to select the Memory mode. V/M VFO mode (Example: VFO A) Memory mode (Example: Memory channel 1) 2. Touch the MHz digits. (Example: 14) BAND STACKING REGISTER screen ••Opens the F-INP screen. 3. Enter the Split Frequency Offset. LIf you want the minus shift direction, touch LEnter the offset between −9.999 MHz and +9.999 MHz (1 kHz steps). [SPLIT] or [-SPLIT] is displayed F-INP screen Touch for -Split 4. To save the entry, touch [SPLIT] or [−SPLIT]. ••Closes the F-INP screen. Entry examples ••10 kHz: [1], [0], [SPLIT] ••−1.025 MHz 1], [0], [2], [5], [−SPLIT] LAfter entering, the Split function is automatically turned ON. ••Opens the BAND STACKING REGISTER screen. 3. Touch [F-INP]. BAND STACKING REGISTER screen ••Opens the F-INP screen. 4. Enter a Memory channel number between 1 and 99. (Memory channel 5) LIf you want to set the Program Channel number (P1 or P2), enter "100" for P1, and "101" for P2. F-INP screen 5. Touch [MEMO] to select the entered channel. ••Closes the F-INP screen. DDBand Edge Beep You will hear a Band Edge Beep and will be displayed when you tune into or out of an amateur band's frequency range. LYou can change the Band Edge Beep settings in the following menu. MENU » SET > Function > Band Edge Beep 3-5