Icom IC-7300 Instruction Manual basic - Page 42

Setting the key speed, About the Break-in function

Get Icom IC-7300 PDF manuals and user guides View all Icom IC-7300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

4 RECEIVING AND TRANSMITTING Operating CW (Continued) DDSetting the key speed You can set the key speed of the internal electric keyer. 1. Select the CW mode. 2. Display the Multi-function menu. Push 3. Touch [KEY SPEED]. 4. Set the key speed to between 6 and 48 Words Per Minute (WPM). Rotate Push DDAbout the Break-in function Use the Break-in function in the CW mode to automatically switch between transmit and receive when keying. The IC-7300 is capable of Semi Break-in and Full break-in modes. TIP: The key type is set to "Paddle" by default. You can select the keyer type on the CW-KEY SET screen. (p. 4-14) Semi Break-in operation In the Semi Break-in mode, the transceiver transmits when keying, and then automatically returns to receive after a preset time after you stop keying. 1. Select the CW mode. 2. Push VOX/BK-IN to display "BKIN." LPushing VOX/BK-IN selects "BKIN (Semi Break-in)," "F-BKIN (Full Break-in)" or OFF (no indication). Semi Break-in 3. To adjust the Break-in delay time, hold down VOX/BK-IN for 1 second. ••Opens the BKIN menu. 4. Set to where the transceiver does not return to receive while keying. Rotate LWhen you are using a paddle, push MULTI to display the Multi-function menu, and then adjust the KEY SPEED while operating the paddle. 5. To close the BKIN menu, push EXIT . 4-12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
4
RECEIVING AND TRANSMITTING
4-12
D
Setting the key speed
You can set the key speed of the internal electric
keyer.
1.
Select the CW mode.
2. Display the Multi-function menu.
3. Touch [KEY SPEED].
Operating CW (Continued)
4.
Set the key speed to between 6 and 48 Words Per
Minute (WPM).
Rotate
Push
Push
D
About the Break-in function
Use the Break-in function in the CW mode to
automatically switch between transmit and receive
when keying. The IC-7300 is capable of Semi Break-in
and Full break-in modes.
Semi Break-in
Semi Break-in operation
In the Semi Break-in mode, the transceiver transmits
when keying, and then automatically returns to receive
after a preset time after you stop keying.
1.
Select the CW mode.
2. Push
VOX/BK-IN
to display “BKIN.”
L
Pushing
VOX/BK-IN
selects “BKIN (Semi Break-in),”
“F-BKIN (Full Break-in)” or OFF (no indication).
Rotate
3.
To adjust the Break-in delay time, hold down
VOX/BK-IN
for 1 second.
•
Opens the BKIN menu.
4.
Set to where the transceiver does not return to
receive while keying.
L
When you are using a paddle, push
MULTI
to display
the Multi-function menu, and then adjust the KEY
SPEED while operating the paddle.
TIP
: The key type is set to “Paddle” by default. You can
select the keyer type on the CW-KEY SET screen.
(p. 4-14)
5.
To close the BKIN menu, push
EXIT
.