Icom IC-F3003 Instruction Manual - Page 14
LED indicator
View all Icom IC-F3003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
2 PANEL DESCRIPTION ■ LED indicator The LED indicator indicates the status of various parameters of the transceiver as follows; (Ref.; R=Red, G=Green, O=Orange) • TX: Lights Red while transmitting a signal. R* • RX: Lights Green while receiving a signal. G • Call LED (ON): Turns ON while receiving a matched 2/5-tone. ED ON O • Call LED (Blink): Blinks while receiving a matched 2/5-tone. ED Blink O O • Fast/Slow scan: Blinks when the Fast/Slow scan is activated. can G G • Low Battery 1: You should charge the battery. (blinks slowly) B AT T1 G G • Low Battery 2: You must charge the battery. (blinks fast) B AT T2 G G G G • TX low Battery 1: Low Battery was detected during TX mode. w BATT 1 R* R* • TX low Battery 2: Very Low Battery was detected during TX mode. w BATT 2 R* R* R* R* • Channel Error: A non-programmed channel is selected. R O R O R O R O R O R O R O R O * Lights (or blinks) orange when the optional battery case is attached. 7