Icom IC-F3003 Instruction Manual - Page 26
Setting the squelch level
View all Icom IC-F3003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
3 BASIC OPERATION ■ Setting the squelch level The squelch circuit mutes the received audio signal, depending on the signal strength. q Rotate [VOL] to turn the trans- [ROTARY SELECTOR] ceiver power OFF. w S et [ROTARY SELECTOR] to [VOL] any channel other than Chan- nel 16. e While pushing and holding [PTT] and [Lower], rotate [VOL] to turn the power ON and enter [PTT] the squelch level adjustment mode. [Upper] r Push [Upper] to increase the [Lower] squelch level (tight squelch), or push [Lower] to decrease the squelch level (loose squelch). • The adjustable range is 0 (loose squelch) to 9 (tight squelch). • A beep sounds after pushing [Upper] or [Lower]. If the level is set on 0 or 9, an error beep sounds after pushing. Therefore, you can determine the current level setting by the type of beep that sounds. t Rotate [VOL] to turn the power OFF, then ON to exit the squelch level adjustment mode. NOTE: This operation may not be available, depending on the presetting. Ask your dealer for details. 19