Icom IC-F3003 Instruction Manual - Page 47
Setting the VOX gain
View all Icom IC-F3003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
6 OPTIONS D Setting the VOX gain 1 The VOX sensitivity level can be adjusted from 1 (minimum) to 10 (maximum). 2 q C onnect the optional headset (HS-94, HS-95 or HS-97) and 3 [ROTARY SELECTOR] [VOL] 4 OPC-2004. (p. 38) w Rotate [VOL] to turn the trans- 5 ceiver power OFF. 6 e S et [ROTARY SELECTOR] to Channel 16. [PTT] 7 r While pushing and holding 8 [PTT] and [Upper], rotate [VOL] to turn the power ON and enter the VOX gain adjustment mode. [Upper] [Lower] 9 10 t Push [Upper] to increase, or 11 push [Lower] to decrease the VOX gain while speaking into 12 the optional headset. 13 • The adjustable range is 1 (minimum) to 10 (maximum). • A beep sounds after pushing [Upper] or [Lower]. 14 If the level is set on 1 or 10, an error beep sounds after pushing. Therefore, you can determine the current level setting by the type 15 of beep that sounds. y R otate [VOL] to turn the power OFF, then ON to exit the VOX 16 gain adjustment mode. 17 NOTE: 18 • This operation may not be available, depending on the preset- 19 ting. Ask your dealer for details. • Set the microphone gain before setting the VOX gain. (p. 18) 20 40