Icom IC-F5061D Instruction Manual - Page 11
Wide/narrow Key, Dtmf Autodial Key, Re-dial Key, Call Keys, Emergency Key, Surveillance Key
View all Icom IC-F5061D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
PANEL DESCRIPTION 1 WIDE/NARROW KEY EMERGENCY KEY 1 Push to toggle the IF bandwidth between wide and narrow. Hold down to transmit the emergency call. (Analog or mixed mode operation only) • The emergency call transmits with beeps; the display does not • The wide passband width can be selected from 25.0 or 20.0 kHz change. using the CS-F3060 #02 cloning software. (PMR operation only) • The transceiver can transmit the emergency call silently or with the Ask your dealer for details. display changes depending on the pre-setting. Ask your dealer for details. DTMF AUTODIAL KEY Push to enter the DTMF channel selection mode. Then select the desired DTMF channel using [CH Up]/[CH Down]. After selecting the DTMF channel, push again to transmit • If you want to cancel the emergency call, hold down the key again before transmitting the call. • The emergency call is transmitted one time only or repeatedly until receiving a control code, depending on the pre-setting. the selected DTMF code. SURVEILLANCE KEY RE-DIAL KEY Push to transmit the last-transmitted DTMF code. • TX memories are cleared after turning the transceiver OFF. Push to turn the surveillance function ON or OFF. When this function is turned ON, the beep is not emitted and the LCD backlight and the LED indicator do not light when a signal is received or a key is pushed. CALL KEYS Push to transmit a 2/5-Tone/BIIS ID code. • Call transmission is necessary before calling another station depending on your signalling system. TX CODE ENTER KEY (PMR operation only) Push to enter the ID code edit mode directly, for both 5-Tone and MSK. Then set the desired digit using [CH Up]/ • [Call A] and/or [Call B] may be available when your system [CH Down]. (p. 11) employs selective 'Individual/Group' calls. Ask your dealer which call is assigned to each key. TX CODE CHANNEL SELECT KEY ➥ P ush to enter the ID code channel selection mode directly. Then set the desired channel using [CH Up]/ [CH Down]. (p. 10) ➥ D uring ID code channel selection mode, hold down for 1 second to enter the ID code edit mode for 5-Tone and MSK. Then set the desired digit using [CH Up]/[CH Down]. (p. 11) 6