Icom IC-F5061D Instruction Manual - Page 13
BASIC OPERATION, ■ Turning power ON, ■ Channel selection
View all Icom IC-F5061D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
2 BASIC OPERATION ■ Turning power ON ■ Channel selection 1 2 q Hold down [ ] for 1 second to turn the power ON. Several types of channel selections are available. Methods w If the transceiver is programmed for a start up password, may differ according to your system set up. 3 input the digit codes as directed by your dealer. • The keys as below can be used for password input: NON-ZONE TYPE: 4 The transceiver detects numbers in the same block as identical. To select the desired operating channel: 5 Therefore "01234" and "56789" are the same. • Push [CH Up] or [CH Down]. • Push one of [MR-CH 1] to [MR-CH 4]. 6 KEY 7 NUMBER 0 1 2 3 4 ZONE TYPE: To select the desired zone: 8 56789 • Push [Zone], then push [CH Up] or [CH Down]. 9 e W hen the "PASSWORD" indication does not clear after • Push [Zone Up] or [Zone Down]. 10 inputting 6 digits, the input code number may be incorrect. Turn the power off and start over in this case. D Voting operation 11 The transceiver automatically starts scanning when a zone, specified for the voting operation, is selected. 12 The voting scan detects the received signal strength of the 13 repeater and automatically selects the strongest station. 14 AUTOMATIC SCAN TYPE: Channel setting is not necessary for this type. When turning 15 power ON, the transceiver automatically starts scanning. 16 Scanning stops when a call is received. 8