Icom IC-F5061D Instruction Manual - Page 6

1 PANEL DESCRIPTION ■ Front panel q w Function display (p. 2) e r Speaker Icom Inc. y t q AF VOLUME CONTROL KNOB [VOL] y MICROPHONE CONNECTOR Rotate the knob to adjust the desired audio output level. Connect the supplied or optional microphone. • The minimum audio level is pre-programmed. CAUTION: DO NOT connect non-specified micro- w LED INDICATOR ➥ Lights red while transmitting. phones. The pin assignments may be different and the transceiver may be damaged. ➥ Lights green while receiving. e UP/DOWN KEYS [CH Up]/[CH Down] Push to select an operating channel, and so on. * The desired function can be assigned by your dealer. (p. 3) D MICROPHONE The supplied or optional microphone has a PTT switch and a hanger hook. • The following functions can be set for operation when the micro- r POWER SWITCH [ ] phone is on or off hook (depending on the setting): Hold down for 1 second to turn the power ON and OFF. - Automatic scan starts when it is ON hook. • Automatic scan start, Password prompt and Set mode access - Scan is cancelled when it is OFF hook. can be set to activate at power ON. - Scan is paused when it is off hook. t DEALER ASSIGNABLE KEYS Various functions can be preset by your dealer. (p. 3) - Automatic priority channel selection is available when it is off hook. - Set to 'Inaudible' (muted) mode when it is on hook. - Set to 'Audible' (unmute) mode when it is off hook. 1