Icom IC-F5061D Instruction Manual - Page 15

BASIC OPERATION 2 1 D Transmitting notes D TX code channel selection 2 • Transmit inhibit function If the transceiver has [TX Code CH Select] assigned to it, 3 The transceiver has several inhibit functions which restrict transmission under the following conditions: the indication can be toggled between the operating channel number (or name) and TX code channel number (or name). 4 - The channel is muted ('Inaudible' mode) When the TX code channel number (or name) is displayed, 5 - The channel is busy. - U n-matched CTCSS is received. [CH Up] or [CH Down] selects the TX code channel. 6 (Or matched, depending on the preprogramming) - The selected channel is a 'receive only' channel. USING [TX CODE CH SELECT] KEY: 7 q P ush [TX Code CH Select]- a TX code channel number (or name) appears. 8 • Time-out timer w P ush [CH Up] or [CH Down] to select the desired TX code 9 After continuous transmission for the pre-programmed time channel. period, the time-out timer is activated, causing the trans- e After selecting, push [TX Code CH Select] to set. 10 ceiver to stop transmitting. • Return to the stand-by mode. r Push [Call] to transmit the selected TX code. 11 • Penalty timer 12 Once the time-out timer is activated, transmission is further inhibited for a period determined by the penalty timer. USING [TX CODE CH UP]/[TX CODE CH DOWN] KEY: If the transceiver has a [TX Code CH Up] or [TX Code CH 13 Down] key assignment, the programmed TX code channel 14 can be selected directly when pushed. 15 16 10