Icom IC-F5061D Instruction Manual - Page 9
Scan Add/del Tag Key, Prio A/b Keys, Mr-ch 1/2/3/4 Keys, Moni Audi Key, Public Address Key
![]() |
View all Icom IC-F5061D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
PANEL DESCRIPTION 1 1 SCAN ADD/DEL (TAG) KEY ➥ Push to add the channel to, or delete it from, the current scan group. 1. Push to display the scan group, then push [CH Up] or [CH Down] to select the desired group. 2. Push to add or delete the channel to or from the selected scan group. 3. Hold down for 1 second to exit the scan group selection mode. ➥ Push this key while the scan is paused (a signal is detected) on a channel (except for priority channel,) and the channel is cleared from the scan group. D epending on the setting, the cleared channel is added to the scan group again after the scan is cancelled. PRIO A/B KEYS ➥ Push to select Priority A or Priority B channel. ➥ H old down [Prio A (Rewrite)] or [Prio B (Rewrite)] for 1 second to rewrite the operating channel as the Priority A or Priority B channel. MR-CH 1/2/3/4 KEYS Push to directly select the memory channel 1 to 4. MONI (AUDI) KEY ➥ P ush to mute and release the CTCSS (DTCS) or 2-Tone squelch mute. Open any squelch/deactivate any mute while holding down this key. (Only in the LMR mode) ➥ A ctivates one of (or two of) the following functions on each channel independently: (Only in the PMR mode) • While holding down, audio is emitted ('Audible' mode). • Push to mute the channel ('Inaudible' mode). • Push to unmute the channel ('Audible' mode). • After the communication is finished, push to send a 'reset code'. (5-Tone/BIIS operation only) N OTE: The 'Audible' (unmute) mode may automatically return to the 'Inaudible' (mute) mode after a specified period, depending on the presetting. PUBLIC ADDRESS KEY Push to activate the Public Address (PA) function for voice amplification. When the PA function is activated, the audio output can be separately controlled from the transceiver with [CH Up]/[CH Down]. • This function is usable when an external unit, such as a audio amplifier, speaker, and so on is additionally connected. • Push this key, then speak into the microphone while holding down [PTT]. 4
![](/manual_guide/products/icom-icf5061d-instruction-manual-ec7db76/9.png)