Icom IC-F70 / F80 Instruction Manual - Page 24
Group call, Displaying the received call record, Queue indication
View all Icom IC-F70 / F80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
4 BIIS OPERATION D Group call q When a group call is received; • Beeps sound. • " " appears and the mute is released. • The programmed text message (e.g."GROUP") and the calling station ID (or text) is displayed when the indication mode is 2 lines. • The programmed text message (e.g."GROUP") and the calling station ID (or text) is displayed alternately when the indication mode is 1 line, depending on the setting. • " " appears or blinks depending on the setting. Appears Appears or blinks D Displaying the received call record - Queue indication The transceiver memorizes the calling station ID in the memory. Up to 3 calls can be memorized, and the oldest call record is erased when a 4th call is received. However, once the transceiver is powered OFF, the all records are cleared. q Push and hold [P1] (Digital) for 1 sec. • Displays following indication. When a record is available X X w Push and hold [PTT], then speak into the microphone at a normal voice level. • TX indicator lights red. When no record is available NOTE: Only one station is permitted to speak. e Release [PTT] to return to receive. • BUSY indicator lights green while receiving a signal. r To finish the conversation, push [MONITOR] (Moni(Audi)) X to send the 'Clear down' signal. • Either station can send a 'Clear down' signal. • "CLR DOWN" is displayed for 2 sec. (approx.) • " " disappears and the transceiver returns to the standby condition. w Push [Up] or [Down] to select the desired call. e Push and hold [P1] (Digital) for 1 sec. again to return to the standby condition. •When no operation is performed for 30 sec., the transceiver returns to the standby condition automatically. 20