Icom IC-F70 / F80 Instruction Manual - Page 29
Transmitting a status
View all Icom IC-F70 / F80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
BIIS OPERATION 4 I Transmitting a status D General D Transmitting a status The status message can be selected with the programmed q While in the standby condition, push [P1] (Digital), then text, and the message text is also displayed on the function push [Up] or [Down] to select the desired station/group display of the called station. code. 4 Up to 24 status types (1 to 24) are available, and the status w Push [P1] (Digital) again, then push [Up] or [Down] to messages 22 and 24 have designated meanings. select the desired status message. Status 22: Emergency* Status 24: GPS request *The status 22 can also be used as a normal status message by Or, you can select the desired status message using [Status Up]/[Status Down] key directly. disabling the designated meaning. However, the status 24 is fixed. The status call can be sent with both individual and group calls. X Status message is displayed. e Push [P0] (Call) or [PTT]* to transmit the status message to the selected station/group. *PTT call can be made only when PTT call capability is permitted. • 2 beeps will sound and the transceiver returns to the standby condition automatically when the transmission is successful. 25