Icom IC-F70 / F80 Instruction Manual - Page 33

I BIIS indication The following indications are available for the BIIS operation on a BIIS channel. CONNECT : Individual/group call is successful. OK : Message (status or SDM) transmission is suc- cessful. FAILED : No answer back is received. WAIT : Appears during retry of the call (2nd call). CLR DOWN : End the communication. BUSY : Operating channel is in the busy condition. I Priority A channel selection When one of the following operations is performed, the transceiver selects the Priority A channel automatically. Priority A is selected when; • Clear down signal is received/transmitted - Set the 'Move to PrioA CH' item as 'Clear down.' • Turning the power ON The Priority A channel is selected each time the transceiver power is turned ON. • Status call The Priority A channel is selected when transmitting a status call. - Enable the 'Send Status on PrioA CH' item in the BIIS configuration. BIIS OPERATION 4 4 29