Icom IC-M330G Instruction Manual english - Page 16
Software keys, Using the software keys
View all Icom IC-M330G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
2 PANEL DESCRIPTION 13 SOFTWARE KEYS FUNCTION DISPLAY (p. 4 ~ 5) The functions of each keys are displayed. See "Software keys" on the next page for details. 14 POSITION/TIME READOUTS Readouts the current position and time when valid GPS data is received, or when manually entered. Received GPS data: ••"NO POS NO TIME" is displayed if no GPS data has been received, and then a warning message is displayed for 2 minutes after turning ON the transceiver blinks if no GPS data is received for 30 seconds after receiving valid GPS data, and then "??" and a warning message are displayed after 10 minutes. ••A warning message is displayed if no GPS data is received for 4 hours after receiving valid GPS data. Manually entered GPS data: ••A manually entered GPS data is valid for 23.5 hours, and then a warning message is displayed. 15 SCAN INDICATOR ••"SCAN" or "SCAN 16" is displayed while scanning. (p. 16) ••"DW" or "TW" and the watched channel number is displayed while using the Dualwatch or Tri-watch function. (p. 17) 4 ■■Software keys Various often-used functions are assigned to the software keys for easy access. The functions' icons are displayed above the software keys, as shown below. DDUsing the software keys Selecting a software key function Push [◄] or [►] to slide through the selectable functions that are assigned to the software keys. Push the software key under the function's icon to select the function. Push [◄] Push [►] NOTE: The displayed icons or their order may differ, depending on the transceiver version or the presetting. When the MMSI code is not set, the software keys for DSC function are not displayed.