Icom IC-M330G Instruction Manual english - Page 49
Receiving a Test call, Ignore, Able to Comply, Accept
View all Icom IC-M330G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
DSC OPERATION 7 DDReceiving a Test call 1 2 TIP: By default, the Auto ACK function automatically sends an Acknowledgement to the calling station (p. 42). ACPT (Accept) ••Accepts the call. 3 If the function is set to "Manual," the following screens are displayed. ••Displays the received call's information. ••The call is saved in the DSC Log. 4 5 When a Test call is received: ••The alarm sounds for 2 minutes. ••"RCVD TEST CALL" is displayed. ••Push ACK , and then push CALL to 6 send a Test Acknowledgement call. (p. 30) 7 1. Push ALARM OFF to turn OFF the alarm. ••Push RESEND to resend. 8 2. Push the software key below your next operation. 9 10 IGN (Ignore) 11 NOTE: If the Auto ACK function is set to "Auto," the Test Acknowledgement call is automatically sent to the calling 12 ••Ignores the call and returns to the operating screen. ••The call is saved in the DSC Log. station when the call is received. (p. 42) 13 ••" " blinks continuously until you display the call message. 14 ABLE (Able to Comply) 15 ••Sends the Acknowledgement "Able to Comply." 16 ••The call is saved in the DSC Log. 37