Icom IC-M330G Instruction Manual english - Page 8
Precautions
View all Icom IC-M330G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
PRECAUTIONS RWARNING! NEVER connect the transceiver directly to an AC outlet. This may cause a fire or an electric shock. RWARNING! NEVER connect the transceiver to a power source of more than 16 V DC such as a 24 V battery. This connection could cause a fire or damage the transceiver. RWARNING! NEVER reverse the DC power cable polarity when connecting to a power source. This could damage the transceiver. RWARNING! NEVER cut the DC power cable between the DC connector on the transceiver's rear panel and the fuse holder. If an incorrect connection is made after cutting, the transceiver may be damaged. RWARNING! NEVER operate the transceiver during a lightning storm. It may result in an electric shock, cause a fire or damage the transceiver. Always disconnect the power source and antenna before a storm. RWARNING! NEVER place the transceiver where normal operation of the vessel may be hindered, or where it could cause bodily injury. CAUTION: DO NOT install the transceiver and/or microphone less than 1 meter from the vessel's magnetic navigation compass. CAUTION: DO NOT use or leave the transceiver in areas with temperatures below -20°C (-4ºF) or above +60°C (+140ºF), or in areas subject to direct sunlight, such as a dashboard. CAUTION: DO NOT use harsh solvents such as Benzine or alcohol to clean the transceiver, as they will damage the transceiver's surfaces. If the transceiver becomes dusty or dirty, wipe it clean with a soft, dry cloth. NEVER place the transceiver in an insecure place to avoid inadvertent use by unauthorized persons. BE CAREFUL! The transceiver's rear panel will become hot when transmitting continuously for long periods of time. BE CAREFUL! The transceiver meets IPX7 requirements for waterproof protection*. However, once the transceiver or microphone has been dropped, or the waterproof seal is cracked or damaged, waterproof protection cannot be guaranteed because of possible damage to the case or the waterproof seal. * Except for the DC power connector, NMEA In/Out leads and AF Out leads. vii