Icom IC-M36 Service Manual - Page 15

SECTION 1. SPECIFICATIONS 1-1 IC-M35 ï GENERAL • Frequency coverage : Transmit 156.000-161.450 MHz Receive 156.000-163.425 MHz • Mode : FM (16K0G3E) • Channel spacing : 25 kHz • Power supply requirement : BP-251 and BP-252 only • Current drain (at 7.4 V DC) TX at 6 W : 1.5 A typical at 5 W : 1.3 A typical at 1 W : 0.7 A typical at 0.5 W : 0.6 A typical RX Max. audio Internal speaker : 0.3 A typical External speaker : 0.2 A typical Power save : 10 mA typical • Frequency stability : ±1.5 kHz • Operating temperature range : -15°C to +55°C • Dimensions : 62 (W) u 139.5 (H) u 43 (D) mm (Projections not included) • Weight : Approx. 295 g (incl. BP-252, FA-SC58V and MB-109) ï TRANSMITTER • Output power (at 7.4 V DC) : 6 W (High) and 1 W (Low)* *5 W (High) and 1 W (Low) for Australian version 1 W (High) and 0.5 W (Low) for German version depending on the pre-setting • Modulation system : Var iable reactance frequency modulation • Maximum frequency deviation : ±5 kHz • Adjacent channel power : 70 dB • Spurious emissions : 0.25 μW ï RECEIVER • Receive system : Double-conversion superhetero- dyne • Sensitivity (20 dB SINAD) : -2 dBμ emf typical • Squelch sensitivity : -6 dBμ emf typical (at threshold) • Intermodulation : 68 dB • Spurious response : 70 dB* *65 dB for Australian version • Adjacent channel selectivity : 70 dB • Audio output power (at 10% distortion) Internal speaker : 0.7 W typical with a 16 ȍ load External speaker : 0.2 W with an 8 ȍ load 1-2 IC-M36 ï GENERAL • Frequency coverage : Transmit 156.025-157.425 MHz Receive 156.050-163.275 MHz • Mode : FM (16K0G3E) • Channel spacing : 25 kHz • Power supply requirement : BP-251 and BP-252 only • Current drain (at 7.4 V DC) : TX (6 W/1 W) 1.5 A/0.7 A typical Max. audio 0.3 A typical (internal speaker) 0.2 A typical (external speaker) Power save 10 mA typical • Frequency stability : ±10 ppm • Operating temperature range : -20°C to +60°C; -4°F to +140°F • Dimensions : 62 (W) × 139.5(H) × 43(D) mm (projections not included) 27⁄16(W) × 51⁄2(H) × 111⁄16(D) inch • Weight : Approx. 295 g; 10.4 oz (incl. BP-252, FA-SC58V and MB-109) ï TRANSMITTER • Output power (at 7.4 V DC) : 6 W (High) and 1 W (Low) • Modulation system : Variable reactance frequency modulation • Maximum frequency deviation : ±5 kHz • Adjacent channel power : 70 dB • Spurious emissions : -68 dBc typical ï RECEIVER • Receive system : Double-conversion superheterodyne • Sensitivity (12 dB SINAD) : 0.25 μV typical • Squelch sensitivity : 0.35 μV typical (at threshold) • Intermodulation : 70 dB typical • Spurious response : 70 dB typical • Adjacent channel selectivity : 70 dB typical • Audio output power (at 10% distortion) Internal speaker : 0.70 W typical with a 16 Ω load External speaker : 0.35 W typical with an 8 Ω load All stated specifications are subject to change without notice or obligation. 1 - 1