Icom IC-R8600 I/q Output Reference Guide - Page 10
■Usable control commands, Command description
View all Icom IC-R8600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
I/Q SIGNAL ■■Usable control commands DDCommand description Some commands can both read and write data, while others can only read or write. Usable commands differ, according to the I/Q mode state (ON or OFF). Command Number Sub command Number Data Command Function 05 See p.10 Set the receive frequency. 11* 00, 10, Send/read the Attenuator 20, 30 (0 0=ATT OFF, 10=10 dB, 20=20 dB, 30=30 dB) 12* 00~02 Send/read the antenna connector (only in the HF band) (00=ANT1, 01=ANT2, 02=ANT 3) 14* 02 0000~ Send/read the RF Gain 0255 (0000=Minimum, 0255=Maximum) (BCD value) 16* 02 00/01 Send/read the PRE-AMP setting (00=OFF, 01=ON) 65 00/01 Send/read the IP+ function status (00=OFF, 01=ON) 1A 0E Read the band edge Count (Number of data in an edge unit returned in a BCD value.) 0F See p.10 Read the band edge frequency 12 00/01 The OVF Indicator status (00=OFF, 01=ON) 13* 00 00/01 Send/read the I/Q mode status (00=OFF, 01=ON) 01 See p.11 Send/read I/Q Output setting When the I/Q mode is OFF Not usable Not usable Not usable Not usable Not usable Not usable Not usable Not usable Not usable Usable Set to "ON": Not usable When the I/Q mode is ON Usable Usable Usable Usable Usable Usable Usable Usable Usable Usable 02 00/01 Send/read HF band BPF setting (00=OFF, 01=ON) Commands other than listed above *(Asterisk) Send/read data Set to "OFF": Usable Read setting: Usable Usable Not usable Usable Not usable Not usable 9