Icom IC-T10 Advanced Manual - Page 26

Duplex reverse, Tuning step, Priority scan, Tone scan, Pause timer, Program skip scan

Get Icom IC-T10 PDF manuals and user guides View all Icom IC-T10 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

5 SET MODE Set Mode items Frequency offset (Default: 0.600*) Tone scan (Default: OFF) Sets the difference between the transmit and receive frequencies for Repeater operation or Duplex operation. ••Range: Set to between 0.000 and 20.000 (MHz). *The default value may differ, depending on the frequency band. Duplex reverse (Default: OFF) Selects whether or not to enable the Tone Scan function. ••OFF: Turns OFF the function. ••On: Detects the Tone frequency or DTCS code used by the transceiver that communicates using the Tone Squelch function. Pause timer (Default: 15) Selects whether or not to reverse the Duplex frequency. ••OFF: Normal Duplex communications. ••On: Reverse the Duplex frequency. Tuning step (Default: 5.0*) Selects a tuning step. In the VFO mode, when you select the operating frequency by rotating [DIAL], the frequency changes in this selected tuning step. It also applied for a VFO scan. ••Options: 5.0, 10.0, 12.5, 15.0, 20.0, 25.0, 30.0, 50.0, 100.0, 125.0, and 200.0 (kHz) *A default value may differ, depending on the transceiver version. Selects a Scan Pause Timer. When a signal is received during a scan, the scan pauses for the set period of time, and then resumes. ••5: The scan pauses for 5 seconds, and then resumes. ••10: The scan pauses for 10 seconds, and then resumes. ••15: The scan pauses for 15 seconds, and then resumes. ••P-2: The scan pauses until the received signal disappears, and then resumes after 2 seconds. Program skip scan (Default: On) Priority scan (Default: OFF) Selects whether or not to enable the Priority Scan function and Priority Bell. ••OFF: Turns OFF the function. ••On: Turn ON the function. ••bELL: When a signal is received while operating the Priority Scan, a bell sounds and " " blinks. Selects whether or not to enable the Program Skip Scan function for a VFO mode scan. This function enables the transceiver to skip the unwanted frequencies that are entered as a Memory channel and are set to "PSKIP." ••OFF: The transceiver scans all frequencies. ••On: The transceiver does not scan frequencies set as "PSKIP" frequencies. 5-4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
5
SET MODE
5-4
Set Mode items
FREquEnCy offsEt
(Default: 0�600*)
SEts tHE DIffEREnCE bEtWEEn tHE tRAnsmIt AnD RECEIvE
frequencies for Repeater operation or Duplex
operation�
• Range:
Set to between 0�000 and 20�000 (MHz)�
*µHE DEfAULt vALUE mAy DIffER, DEPEnDInG
on the frequency band�
Duplex reverse
(Default: OFF)
Selects whether or not to reverse the Duplex
frequency�
• OFF:
Normal Duplex communications�
• On:
Reverse the Duplex frequency�
Tuning step
(Default: 5�0*)
Selects a tuning step� In the VFO mode, when you
select the operating frequency by rotating [DIAL], the
frequency changes in this selected tuning step�
It also applied for a VFO scan�
• Options:
5�0, 10�0, 12�5, 15�0, 20�0, 25�0, 30�0,
50�0, 100�0, 125�0, and 200�0 (kHz)
*¼ DEfAULt vALUE mAy DIffER, DEPEnDInG
on the transceiver version�
Priority scan
(Default: OFF)
Selects whether or not to enable the Priority Scan
function and Priority Bell�
• OFF:
Turns OFF the function�
• On:
Turn ON the function�
• bELL:
When a signal is received while
operating the Priority Scan, a bell
sounds and “
” blinks�
Tone scan
(Default: OFF)
Selects whether or not to enable the Tone Scan
function�
• OFF:
Turns OFF the function�
• On:
Detects the Tone frequency or
DTCS code used by the transceiver
that communicates using the Tone
Squelch function�
Pause timer
(Default: 15)
Selects a Scan Pause Timer� When a signal is
received during a scan, the scan pauses for the set
period of time, and then resumes�
• 5:
The scan pauses for 5 seconds, and
then resumes�
• 10:
The scan pauses for 10 seconds, and
then resumes�
• 15:
The scan pauses for 15 seconds, and
then resumes�
• P-2:
The scan pauses until the received
signal disappears, and then resumes
after 2 seconds�
Program skip scan
(Default: On)
Selects whether or not to enable the Program Skip
Scan function for a VFO mode scan�
This function enables the transceiver to skip the
unwanted frequencies that are entered as a Memory
channel and are set to “PSKIP�”
• OFF:
The transceiver scans all
frequencies�
• On:
The transceiver does not scan
frequencies set as “PSKIP”
frequencies�