Icom IC-T10 Advanced Manual - Page 38

Using the Tone scan function

Get Icom IC-T10 PDF manuals and user guides View all Icom IC-T10 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

6 OTHER FUNCTIONS Using the Tone scan function The Tone Scan function detects the subaudible tone frequency and DTCS code in a received signal. By monitoring a signal transmitted on a repeater input frequency, you can determine the tone frequency required to access the repeater. Step.1 Turning ON the Tone scan function 1. Push [SET] to enter the Set mode. ••A Set mode item is displayed. 2. Repeatedly push [SET] to select "t SCAn." 3. Rotate [DIAL] to select "On." 4. Push [V/M/C] to exit the Set mode. Step.2 Using the Tone scan function zzHold down [SCAN] until a beep sounds to start the scan. LLThe transceiver slowly scans while receiving, rapidly scans while no signal is received. LLWhen the tone frequency or DTCS code is received, the transceiver overwrites the Set mode contents (tone frequency or DTCS code) by the received one, and then continues scanning. LLThe transceiver automatically disables the Pocket Beep function, if you start scanning with the function is turned ON. Tone scan DTCS code scan 6-7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
6
OTHER FUNCTIONS
6-7
Using the Tone scan function
The Tone Scan function detects the subaudible tone
frequency and DTCS code in a received signal� By
monitoring a signal transmitted on a repeater input
fREqUEnCy, yoU CAn DEtERmInE tHE tonE fREqUEnCy
required to access the repeater�
Step.1 Turning ON the Tone scan function
1�
Push [SET] to enter the Set mode�
• A Set mode item is displayed�
2�
Repeatedly push [SET] to select “t SCAn�”
3�
Rotate [DIAL] to select “On�”
4�
Push [V/M/C] to exit the Set mode�
Step.2 Using the Tone scan function
z
Hold down [SCAN] until a beep sounds to start the
scan�
L
µHE tRAnsCEIvER sLoWLy sCAns WHILE RECEIvInG, RAPIDLy
scans while no signal is received�
L
¿HEn tHE tonE fREqUEnCy oR ³µ»S CoDE Is RECEIvED,
the transceiver overwrites the Set mode contents (tone
fREqUEnCy oR ³µ»S CoDE) by tHE RECEIvED onE, AnD
then continues scanning�
L
The transceiver automatically disables the Pocket
²EEP fUnCtIon, If yoU stARt sCAnnInG WItH tHE fUnCtIon Is
turned ON�
Tone scan
DTCS code scan