Icom IC-T10 Advanced Manual - Page 36
Tone squelch operation, Step. 1 Setting the tone squelch frequency, Step. 2 Using the tone squelch
![]() |
View all Icom IC-T10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
6 OTHER FUNCTIONS Tone squelch operation The tone squelch opens only when you receive a signal that includes a matching subaudible tone in the FM or FM narrow (FM-N) mode. You can silently wait for calls from other stations using the same tone. Also, the reversed tone squelch function mutes the squelch when a signal includes a matching subaudible tone. Step. 1 Setting the tone squelch frequency 1. Repeatedly push [V/M/C] to select the VFO mode. 2. Hold down [MODE] until two beeps sound to select an operating mode. 3. Set an operating frequency. 4. Push [SET]. 5. Repeatedly push [SET] to select "C tOnE." 6. Rotate [DIAL] to set the tone squelch frequency. Tone squelch types indication Repeater tone (Example) Tone squelch CTCSS Pocket Beep Reverse Tone Squelch 7. Push [V/M/C] to exit the Set mode. Step. 2 Using the tone squelch 1. Push [SET]. 2. Repeatedly push [SET] to select "tOnE." TIP: Using the Pocket Beep function When the transceiver receives a signal, a beep sounds for 30 seconds and " " blinks. LLConfirm "P bEEP" is selected in the Set mode. (p. 5-3) 3. Rotate [DIAL] to select a tone squelch type. 4. Operate normally. LLYou will only hear the audio of stations using the same Tone Squelch frequency. All other signals will be muted. 6-5
![](/manual_guide/products/icom-ict10-advanced-manual-7bf3754/36.png)