Icom IC-T10 Advanced Manual - Page 35
Selecting the DTMF transmit speed, The image of transmitting the DTMF code
View all Icom IC-T10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
6 OTHER FUNCTIONS Transmitting a DTMF code DDSelecting the DTMF transmit speed You can select the DTMF transmit speed. 1. Rotate [VOL] counter-clockwise to turn OFF the transceiver. 2. While holding down [SET], rotate [VOL] clockwise to turn ON the transceiver. ••An Initial Set mode item is displayed. 3. Repeatedly push [SET] to select "dtmF-S." 4. Rotate [DIAL] to select an option. 5. Push [V/M/C] or [ENT] to exit the Initial Set mode. The image of transmitting the DTMF code Pi, Po, Pa Pi-, Po-, Pa- When "100ms" is selected, the DTMF transmit speed is fast. When "500ms" is selected, the DTMF transmit speed is slow. 6-4
6
OTHER FUNCTIONS
6-4
Transmitting a DTMF code
D
Selecting the DTMF transmit speed
You can select the DTMF transmit speed�
1�
Rotate [VOL] counter-clockwise to turn OFF the
transceiver�
2�
¿HILE HoLDInG DoWn [Sµ], RotAtE [V¶À] CLoCkWIsE
to turn ON the transceiver�
• An Initial Set mode item is displayed�
3�
Repeatedly push [SET] to select “dtmF-S�”
4�
Rotate [DIAL] to select an option�
5�
Push [V/M/C] or [ENT] to exit the Initial Set mode�
The image of transmitting the DTMF code
¿HEn “100ms” Is sELECtED,
the DTMF transmit speed
is fast�
¿HEn “500ms” Is sELECtED,
the DTMF transmit speed
is slow�
¸I, ¸o, ¸A
¸I–, ¸o–, ¸A–