Image Fitness 4.0smith Machinekit English Manual - Page 6
overtighten
![]() |
View all Image Fitness 4.0smith Machinekit manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
3. Attach the Backrest Tube (53) to the Base (54) 3 with an M10 x 90mm Bolt (9) and an M10 Nylon Locknut (1). The Backrest Tube should be able to pivot freely. 4. Press 1" Square Inner Caps (57) into the ends of the Backrest Rails (16). 4 Turn the Backrest Rails (16) so that the Indi- 57 cated holes are toward the flat end of the Backrest (15). Attach the Backrest Rails to the Backrest with four M6 x 40mm Bolts (4). Do 16 not tighten the Bolts yet. 53 54 0 4 57 Holes 5. Lubricate the two M10 x 190mm Bolts (58). Attach the Backrest (15) to the Base (54) by inserting an M10 x 190mm Bolt through the ends of the Backrest Rails (16) and the indicated tube on the Base. Tighten an M10 Nylon Locknut (1) onto the Bolt. Do not overtighten the Nylon Locknut. Insert the other M10 x 190mm Bolt (58) through the other holes the Backrest Rails (16) and the indicated tube on the Adjustment Tube (21). Tighten an M10 Nylon Locknut (1) onto the Bolt. Do not overtIghten the Nylon Locknut. See step 4. Tighten the four M6 x 40mm Bolts (4). 15 5 16 1 21 Flat End 15 58 Lubricate 54 6
![](/manual_guide/products/image-fitness-40smith-machinekit-english-manual-8ef0a84/6.png)