Insignia IS-HDPLTV42 User Manual (English) - Page 17
select channels.
View all Insignia IS-HDPLTV42 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
IS-HDPLTV42 42-inch HDTV Cable type Scrambled and unscrambled cable CONNECTING TO AN ANTENNA Connection description 1 Connect the 75-ohm cable from the cable TV service to a splitter (not supplied). 2 Connect a 75-ohm cable from the splitter to the cable converter box input jack, then connect another 75 ohm cable from the converter box output jack to the A jack on an A/B switch box (not supplied). 3 Connect a 75-ohm cable from the splitter to the B jack on the A/B switch box. 4 Connect the A/B switch box to the VHF/UHF jack on the back of your HD TV 5 To watch scrambled channels, set the switch box to the A position, set your HD TV to the output channel of the converter box (usually 3 or 4), then use the converter box or satellite box to select channels. Or To watch unscrambled channels, set the switch box to the B position, then use your HD TV remote control to tune channels. 75-ohm coaxial cable 75-ohm antenna connector Twin lead feeder (300-ohm) Loosen the Insert the Tighten the screw feeder screw 16 www.insignia-products.com